Konica Minolta bizhub 181 - Manual (Page 137)

4 Making copies
4-44 bizhub 181
Making
co
pies
Chapter 4
5
Use the keypad to type in “250” for the length (X), and then press the
[OK] key.
– The paper length (X) can be set between 5-1/2 inch (140 mm) and
17 inch (432 mm).
Refer to the diagram at
the right and be sure to
specify the paper width
and length measure-
ments correctly.
6
Use the keypad to type in “180” for the width (Y), and then press the
[OK] key.
– The paper width (Y) can be set between 3-1/2 inch (90 mm) and 11-
3/4 inch (297 mm).
The BYPASS PAPER SETTING menu appears again.
length (X)
width (Y)