Konica Minolta bizhub 181 - Manual (Page 188)

Advanced copy operations 5
bizhub 181 5-29
Advan
c
e
d
copy ope
ra
tio
n
s
Chap
te
r 5
2
Press the [Function] key.
The COPY FUNCTION
menu appears.
3
Press the [+] or [,] key until “PAGE MARGIN” is selected, and then
press the [OK] key.
4
Press the [+] or [,] key until “ON” is selected, and then press the [OK]
key.
– The width for the binding can be set between 0 inch and 13/16 inch,
in Approx.1/16 inch increments. The manufacturer’s default setting
is 3/8 inch.
– The width of the erased area can be changed using the “MARGIN
SETTING” parameter in the Utility mode. (Refer to “Adjusting the
margin width (“MARGIN SETTING” parameter)” on page 6-63.)
“/” appears beside “PAGE MARGIN” in the COPY FUNCTION menu.