Konica Minolta bizhub 181 - Manual (Page 37)

1 Installation and operation precautions
1-16 bizhub 181
In
sta
llat
ion
a
nd
o
per
at
ion
p
re
c
a
u
ti
on
s
Chapter 1
1.3 Installation precautions
Installation site
Observe the following precautions to maintain the machine in its best possi-
ble condition.
To ensure utmost safety and prevent possible malfunctions, install the ma-
chine in a location that meets the following requirements:
-
A location away from curtains, etc. that may catch fire and burn easily
- A location that is not exposed to water or other liquids
- A location free from direct sunlight
- A location out of the direct airflow of an air conditioner or heater, and not
exposed to extremely high or low temperatures
- A well-ventilated location
- A location that is not exposed to high humidity
- A location that is not extremely dusty
- A location not subjected to undue vibrations
- A stable and level location
- A location where ammonia or other organic gases are not generated
- A location that does not put the operator in the direct airflow of exhaust
from the machine
- A location that is not near any kind of heating devices
Power source
The power source requirements are as follows.
-
Voltage fluctuation:
AC127 V +6%
- Frequency fluctuation:
Within ±3Hz
Use a power source with as few voltage or frequency fluctuations as possi-
ble.