Konica Minolta bizhub 181 - Manual (Page 24)

Installation and operation precautions 1
bizhub 181 1-3
In
sta
llat
ion
a
nd
o
per
at
ion
p
re
c
a
u
ti
on
s
Chapter 1
Disassemble and modification
WARNING
• Do not attempt to remove the covers and pan-
els which have been fixed to the product. Some
products have a high-voltage part or a laser
beam source inside that could cause an electri-
cal shock or blindness.
• Do not modify this product, as a fire, electrical
shock, or breakdown could result. If the prod-
uct employs a laser, the laser beam source
could cause blindness.
Power cord
WARNING
• Use only the power cord supplied in the pack-
age. If a power cord is not supplied, only use
the power cord and plug that is specified in
POWER CORD INSTRUCTION. Failure to use
this cord could result in a fire or electrical
shock.
• Use the power cord supplied in the package
only for this machine and NEVER use it for any
other product. Failure to observe this precau-
tion could result in a fire or electrical shock.
• Do not scratch, abrade, place a heavy object
on, heat, twist, bend, pull on, or damage the
power cord. Use of a damaged power cord
(exposed core wire, broken wire, etc.) could
result in a fire or breakdown.
Should any of these conditions be found,
immediately turn OFF the power switch, unplug
the power cord from the power outlet, and then
call your authorized service representative.