Konica Minolta bizhub 181 - Manual (Page 107)

4 Making copies
4-14 bizhub 181
Making
co
pies
Chapter 4
Order for automatically switching paper drawers
When automatic tray switching operation is performed, the next paper draw-
er in the following list is chosen.
1st paper drawer → 2nd paper drawer → 3rd paper drawer → 4th paper
drawer → 5th paper drawer → Multi bypass tray
!
Detail
If a setting for special paper (such as overhead projector transparencies
or label sheets) is selected for the 1st paper drawer or multi bypass tray,
that paper drawer will not be selected automatically with the automatic
tray switching feature. For details on selecting settings for special paper,
refer to “Specifying settings for the paper loaded into the 1st paper draw-
er (“TRAY1 PAPER” parameter)” on page 6-22 or “Copying onto manual-
ly fed paper (multi bypass tray)” on page 4-30.
A paper drawer with a special paper setting selected will not be selected
automatically with the automatic tray switching feature. For details on se-
lecting a setting for special paper, refer to “Specifying special paper set-
tings for paper drawers (“PAPER TYPE” parameter)” on page 6-25.
If the default paper drawer is selected in Utility mode, that paper drawer
is selected as a default. For details on selecting the default paper drawer,
refer to “Selecting the default paper drawer (“PAPER PRIORITY” param-
eter)” on page 6-54.