Konica Minolta bizhub 181 - Manual (Page 110)

Making copies 4
bizhub 181 4-17
Making
co
pies
Chapter 4
Loading plain paper into the bypass tray
Load the paper into the manual bypass tray one sheet at a time.
A maximum of 100 sheets of paper can be loaded into the multi bypass tray.
Do not load so much paper into the multi bypass tray that the top of the stack
is higher than the , mark.
2
Note
When paper other than plain paper is loaded, the paper type setting must
be specified from the control panel.
2
Reminder
Load the paper so that the side to be printed on faces down.
Make sure that the paper is not curled (rolled).
1
Load the paper into the manual bypass tray.