Konica Minolta bizhub 181 - Manual (Page 213)

6 Utility mode/Copy mode parameters
6-18 bizhub 181
U
tility mode/Copy
mode parameters
Chap
te
r 6
6.4 PAPER SOURCE SETUP
From the “PAPER SOURCE SETUP” menu, the various settings for the paper
drawers can be changed.
PAPER SOURCE SETUP parameters
No. PAPER SOURCE SET-
UP Description
1 INCH/METRIC This parameter can be used to select the size measurement
system for the paper loaded in each drawer. Select whether
the paper is measured in centimeters (“METRIC”) such as A4
and B5 sizes or in inches (“INCH”) such as Letter size. If no
particular setting is selected, the paper size is detected auto-
matically.
The manufacturer’s default setting is “INCH”.
2 TRAY1 PAPER This parameter can be used to select the size and type of the
paper loaded in the 1st paper drawer. The paper size can be
set to “AUTO”, “SIZE INPUT”, “MEMORY1” or “MEMORY2”.
If “SIZE INPUT” is selected, the paper size can be specified.
The paper type can be set to “PLAIN”, “TRANSPARENCY”.
“CARD” or “ENVELOPE”.
The manufacturer’s default settings are “AUTO” and “PLAIN”.
3 PAPER TYPE This parameter can be used to specify the type of paper load-
ed into each paper drawer, which determines whether or not
the paper is available with the “AUTO” Paper setting or the pa-
per drawer is available with the automatic tray switching fea-
ture. Select the paper type (“PLAIN”, “RECYCLE” or
“SPECIAL”) to specify whether the paper is available with the
Auto Paper function or the tray is available with the auto tray
switching feature.
If special paper is loaded into the tray, “PLAIN”, “RECYCLE”,
“SPECIAL” or “1-SIDE” must be selected.
PLAIN
The paper drawer can be selected with the “Auto” Paper set-
ting and the auto tray switching feature, and it can be used to
make double-sided copies.
RECYCLE
The paper drawer cannot be selected with the “Auto” Paper
setting; however, it can be selected with the auto tray switch-
ing feature, and it can be used to make double-sided copies.
SPECIAL
The paper drawer cannot be selected with the “Auto” Paper
setting or with the auto tray switching feature; however, it can
be used to make double-sided copies.
1-SIDE
The paper drawer can be selected with the “Auto” Paper set-
ting and the auto tray switching feature only when making sin-
gle-sided copies. In addition, it can be used to make double-
sided copies.
The manufacturer’s default setting is “PLAIN”.