Konica Minolta Bizhub 215 - Manual (Page 10)

bizhub 215 2-2
2.1 How to scan 2
2 Scan
2.1 How to scan
There are several methods that can be used to load originals onto a computer as a file by using the scanning
function of this machine. Different methods can be used depending on the case.
The method of scanning differs according to the operation and connection method.
The following types of operation are available:
- Install a driver onto a computer and operate the machine from the computer by using the read applica-
tion.
- Operate the machine by selecting a menu from the Control Panel.
The following connecting methods are available:
- Connect this machine directly to the computer using a USB cable.
- Access via Internet, Intranet or other TCP/IP network (if Network Card NC-504 or Image Controller
IC-209 and Extended Operation Panel MK-733 are installed).
- Save scanned data onto a USB memory inserted in this machine.
This machine can work with the following types of scan functions:
Description How to operate Connection method
Compu-
ter Control
Panel Direct
connec-
tion via
USB ca-
ble Connec-
tion via
net-
works Data re-
ceiving
and for-
warding
using a
USB
memory
TWAIN
driver
(p. 3-2) Install a TWAIN driver onto
the computer and fetch
scan data from TWAIN-
based application.
Resolutions, file size and
other detailed settings are
enabled. . - . . -
WIA driver
(p. 3-9) Install a WIA driver on the
computer and obtain scan
data using an application
that supports a Windows
standard WIA driver.
Data can be easily loaded;
it is barely necessary to
make settings. . - . .
*1
-
Scan to
E-mail
*2
(p. 2-4,
p. 5-2)
Transmit the scanned data
via E-mail - . - . -
Scan to
Server
(FTP)
*2
(p. 2-5,
p. 6-2)
Upload scanned data onto
the specified FTP server
on the Internet. - . - . -
Scan to
Server
(SMB)
*2
(p. 2-6,
p. 6-2)
Save the scanned data
into a shared folder (SMB
server) on the Intranet. - . - . -