Konica Minolta Bizhub 215 - Manual (Page 37)

bizhub 215 5-3
5.1 Basic transmission method 5
3
Enter the E-mail address of the destination.
% A maximum of 64 characters can be entered.
% Pressing , enables the subject, CC address, file format, and compression coding method to be
changed. For details, refer to page 5-6.
% One-touch Dial can be used to select the destination. For details, refer to page 5-14.
% Speed dial can be used for selecting the destination. For details, refer to page 5-15.
% Telephone directory can be used to select the destination. For details, refer to page 5-17.
4
Press the Start key.
Scanning/sending starts.
Tips
- To stop scanning, press Clear/Stop.
- If you are unable to send data, the TX Result Report is output.
d
Reference
To cancel transmission of scanned data while standing by for transmission, press Function and select [CAN-
CEL RESERV.]. For details, refer to [User's Guide Fax Operations].
Loading double-sided originals
1
Load the original.
% For details on how to set the original, refer to [User's Guide Fax Operations].
2
Press Simplex/Duplex.
A screen for specifying Simplex/Duplex appears.
3
Select [1-SIDE] or [2-SIDE] using +,, then press OK.
% When you select [2-SIDE] and press ), you can specify the binding direction of the original. Select
[LEFT] or [TOP], then press OK.
Tips
- The binding direction can be set only when you select [PDF] for the file format.