Konica Minolta Bizhub 215 - Manual (Page 84)

bizhub 215 9-5
9.3 Error of Scan to USB 9
9.3 Error of Scan to USB
Message Cause Correction action
[USB MEMORY FULL] The memory capacity of the USB
is less than the data size to be
scanned. Either increase the amount of
available space by deleting files
on the USB memory,or use an-
other USB memory that has
more available memory space.
[USB Dev.Not support] A non-USB memory stick or a
type of USB memory that cannot
be written to (a write-protected
one) is used. Use a writable USB memory
stick.
[USB Hub Not support] USB hubs are not supported. Remove the USB hub and insert
a USB memory stick.
[COMMUNICATION ERROR]
[USB Memory] Communication with the USB
memory could not be estab-
lished. Check that the USB memory is
connected correctly.
[DISCONNECT]
[USB Memory] The connection to the USB
memory has been interrupted. Check that the USB memory is
connected correctly.