Konica Minolta Bizhub 215 - Manual (Page 82)

bizhub 215 9-3
9.2 Error of network scan 9
9.2 Error of network scan
Tips
- Network scan requires the machine to have either optional Network Card NC-504 or Image Controller
IC-209 and Extended Operation Panel MK-733 installed.
Message Cause Correction action
[COMMUNICATION ERROR]
[XXXX Server] Communication with the server
failed due to a problem in the
machine or the unavailability of
the network or server. Check the communication result
report.
Contact your network adminis-
trator.
[CANNOT CONNECT]
[XXXX Server] A connection with the server
could not be established. Make sure that the Ethernet ca-
ble is correctly connected.
Check the settings of each serv-
er and network.
Contact your network adminis-
trator.
[CANNOT GET IP]
[XXXX Server] An IP address could not be ob-
tained from the DNS server. Contact your network adminis-
trator.
[DISCONNECT]
[XXXX Server] The connection with the server
has been severed. Contact your network adminis-
trator.
[WRONG PASSWORD]
[XXXX Server] Login to the server failed due to
use of an incorrect password. Check the POP3 server settings.
Contact your network adminis-
trator.
[MEMORY FULL] Image data has caused a memo-
ry overflow during E-mail trans-
mission. Remove the transmitted data
stored in the memory.
[MEMORY FILE FULL] The maximum number of files
has been used during E-mail
transmission. Remove the transmitted data
stored in the memory.
[SERVER MEMORY FULL]
[SMTP Server] A memory overflow occurred in
the SMTP server during E-mail
transmission. Contact your network adminis-
trator.
[XXX SERVER ERROR] Scanned data could not be cor-
rectly uploaded to the FTP serv-
er or the SMB server. Contact your network adminis-
trator.