Konica Minolta Bizhub 215 - Manual (Page 83)

bizhub 215 9-4
9.2 Error of network scan 9
9.2.1 If you suspect a failure then do the following
Case examples Cause Correction action Reference
Unable to transmit A connection has not
been made. Check the hub lamp in-
dication to ensure the
connection status [User's Guide Network
Administrator]
Necessary setting for
the machine is not reg-
istered. Configure necessary
network setting. [User's Guide Network
Administrator]
The LAN cable is bro-
ken. Replace the LAN cable. -
Transmission is ena-
bled but no images
have been output to the
terminal or computer at
the destination. The destination termi-
nal has no processing
capacity for transmitted
images. Configure the size, im-
age quality and com-
pression coding
method settings sup-
ported by the destina-
tion terminal and send
data again. p. 5-6
p. 5-8
Transmitting document
without inserting the
text. Depending on the soft-
ware, the attached file
may be invisible if a
mail containing only an
attached file (no text) is
received. In this case,
have the destination
party re-transmit data
that is configured to al-
low insertion of text. [User's Guide Network
Administrator]