Konica Minolta KIP 9000 - Manual (Page 108)

Chapter 3 Error Correction & Maintenance 3-7
3. 1. 3 Mis-feed between Cutter and Drum (J-11)
J-11 is indicated when the media is mis-fed between Cutter and Drum,
1. Draw out the Bypass Feeder, Roll Decks 1 and 2.
2. The mis-fed media can be seen inside.
Check if it is already cut or not.
• If already cut, remove it and go to the
procedure 6.
• If not cut yet, go to the next procedure 3 for
cutting it.
COPY DENSITY MENU ENTER ONLINE
MF
D1
D2
D3
EXIT PAPER DECK
1 2 3 4
SELECT CUT WIRE CLEAN EXP- CLEAN
D4
PF
Roll Decks 1 & 2
Bypass Feeder
Mis-feed media
D4
Cutter
Drum