Konica Minolta KIP 9000 - Manual (Page 19)

Chapter 1 Before Use 1-11
1. 5. 4 Operation Panel
Operation Panel on offers several user operations.
Names and functions of key and indication LED are as follows.
1 2 3 4 5 8 12 15
6 7 9 10 11 13 14 16
No. Name of part Function Refer to
page;
1 Ready Indicator Flashes green when KIP 9000 is warming up, and
lights green when it is ready. 2-2
2 Open Indicator Lights orange when any door or unit is open or
unlocked. 3-26
3 Toner Empty
Indicator
Flashes red when the toner is near empty. (Toner
Cartridge has no Toner).
Lights red when the toner is completely empty.
(Developer Unit has no toner. No more print is
available.) 2-17
4 Roll Empty Indicator Lights red if the roll media in use is empty. 2-4
5 Mis-feed Indicator Lights red when the print media is mis-fed. 3-2
6 WIRE-CLEAN Key Starts cleaning for the Image Corona Wire. 3-33
7 EXP-CLEAN Key Starts cleaning for the LED Head. 3-34
8 Roll Deck Indicator Shows the present selection of roll to perform initial
cut. 2-23
9 SELECT Key Selects a roll to perform initial cut. 2-23
10 CUT Key Performs initial cut for the selected roll. 2-23
11 Mis-feed Location
Indicator
Shows the location of mis-fed media by lighting the
concerning LED. 3-2
12 Density Indicator Shows the present selection of density level. -
13 COPY DENSITY
Key
Changes the density level for making the print density
darker or lighter. -
14 MENU Key
Key
Key
* Key
ENTER Key
[MENU], [ ], [ ] and [ENTER] Keys are used
in User Modes.
(The service personnel may use them also in the field
service.)
[ * ] Key is used to stop the alarm sound. 2-25
to
2-72
COPY DENSITY MENU ENTER ONLINE
MF
D1
D2
D3
EXIT PAPER DECK
1 2 3 4
SELECT CUT WIRE CLEAN EXP- CLEAN
D4
PF