Konica Minolta KIP 9000 - Manual (Page 85)

Chapter 2 Basic Operations 2-62
2. 8.12 User Mode C (Print on TE margin area)
[Function]
User Mode C allows to print the image in the TE margin area (no TE margin is provided).
Normal Image area is enlarged
(TE margin is provided.) (No TE margin is provided.)
The following 3 settings are selectable.
Setting
value Selected setting Description
0 Normal setting Does not allow for printing on TE margin area. (Default)
1 TE Margin Print Mode 1 Allows for printing on TE margin area. A longer interval
is kept between prints for cleaning.
2 TE Margin Print Mode 2 Allows for printing on TE margin area. Normal interval is
kept between prints.
NOTE
When a continuous printing “without TE margin” is performed, sometimes the image on the
former print may be very weakly printed on the next print as “ghost image”.
• The Margin Print mode 1 has a special cleaning process between prints to get rid of
this ghost image. Therefore the interval between prints becomes longer than usual so
the print productivity is reduced, but a better image quality can be expected.
(Recommended setting)
• The Margin Print Mode 2 does not have the cleaning process. Therefore the print
productivity is the same as usual, but the prints may have ghost image. (Not
recommended setting)