Konica Minolta KIP 9000 - Manual (Page 25)

Chapter 2 Basic Operations 2-2
2. 1 Turning on the KIP 9000
1. Plug the KIP 9000 into an exclusive wall outlet.
2. Press “|” side of Power Switch to turn on the KIP 9000.
3. KIP 9000 starts warming up the Fuser Unit, and the Ready Indicator on the Operation Panel
starts flashing.
Ready Indicator flashes.
4. The Ready Indicator lights when the KIP9000 gets ready about 6 minutes later.
Send a print job or copy job from the outer devices.
NOTE
Please confirm the outlet satisfies the following condition before plugging the KIP 9000 into.
U.S.A. / Europe 220 - 240V (+6% / -10%), 16A, 50/60Hz
COPY DENSITY MENU ENTER ONLINE
MF
D1
D2
D3
EXIT PAPER DECK
1 2 3 4
SELECT CUT WIRE CLEAN EXP- CLEAN
D4
PF