Konica Minolta KIP 9000 - Manual (Page 72)

Chapter 2 Basic Operations 2-49
2.8.8 User Mode 8
(Choice of Standard / Special Print Mode [Plain paper])
[Function]
The operation mode of KIP9000 can be set to either Standard Print Mode or Special Print Mode
according to the situation.
This setting become effective when printed with a plain paper.
Many printer parameters of KIP9000 are adjusted most properly in the factory so that the
KIP9000 can produce a satisfactory print quality when printing is performed within what the
machine specification declares. These parameters adjusted in factory will be applied when the
operation mode is set to Standard Mode. Usually the Standard Print Mode is enough for
getting a satisfactory print result.
If some usage condition is not within what the machine specification declares, for example
some unsupported media is used or the temperature/humidity range is not within specified
range, KIP9000 may not be able to produce a satisfactory print result. In such case the service
personnel customize some printer parameters most properly so that a satisfactory print result
can be obtained even in such special case, and save such parameters as Special Print Mode.
(User can not change such parameters.)
What the user has to do in the User Mode 8 is to switch between Standard Print Mode and
Special Print Mode according to the situation. Please consult the service personnel as he
knows in what case the operation mode should be set to Special Print Mode.
Reference
NOTE
User Modes 8, 9 and A are the selection mode of Standard Print Mode and Special Print
Mode. Each of them has its own target media type to which the selected operation mode is
applied.
User Mode 8 : Selection of operation mode for plain paper
User Mode 9 : Selection of operation mode for tracing paper
User Mode A : Selection of operation mode for film