Konica Minolta KIP 9000 - Manual (Page 38)

Chapter 2 Basic Operations 2-15
2. 4. 2 Singular feeding of cut sheet media
Larger cut sheet media than A2 (594mm) or 24” can be fed into KIP9000 by singular feeding only.
1. Select the bypass feeding mode on the outer device.
2. Slide the Cut Sheet Guides and place at the
requested size guides.
3. Put the media on the Bypass Feeder and move it forward until the leading edge contacts the
feeding roller.
Feeding roller
NOTE
Do not leave the cut sheet media on the Bypass Feeder for a long time as it will get
moisture. Such media will result in mis-feed or defective image. (Keep the media in a plastic
bad to block the moisture.)
Cut Sheet Guide