Asante Technologies 1000 - Manual (Page 18)

Accessing the Device
Page 3-2
❏
Type the highest (last) IP address on your network
in the
Hi IP Address field.
❏ Select New in the Discovery Mode field to create a
new map, or select Append to attach this map to the
map that is stored in your system’s buffer (if any).
5
Click Apply.
IntraSpection “discovers” and builds a map of your net-
work. The map contains icons which represent each SNMP
device on the network. Figure 3-1 is an example map.
Figure 3-1 Discovered network map
6
Click once on the SuperStack II Switch 1000’s device
icon
.
∆
Note: The SuperStack II Switch 1000’s device
icon is labeled “ 3Com” and has the device’s IP
address directly below it.
The Device Page for the selected SuperStack II Switch 1000
appears (see Figure 3-2 on page 3-3).
For information on the Device Page’s components, see
“Device Page Components” on page 3-3.
For information on performing basic management func-
tions, see “Performing Basic Management Functions” on
page 4-1.
book Page 2 Thursday, September 4, 1997 3:47 PM