Asante Technologies 1000 - Manual (Page 20)

Accessing the Device
Page 3-4
VLAN Identification Window
The VLAN identification window displays the number of the currently
selected VLAN group. It also allows you to select a configured group of
VLAN by typing the VLAN group’s number in the window.
There are 16 VLAN groups; depending on the number of VLANs you
have created, this number can be from
1001 to 1016.
See “Selecting a VLAN Group for Management” on page 3-5 for informa-
tion on selecting a VLAN group on the front panel image. See “Creating
VLAN Groups” on page 5-5 for information on creating a VLAN group.
Front Panel Image
The front panel image contains the following components (as illustrated
in Figure 3-3):
❏ Status LEDs — real-time LEDs that represent the LEDs
on the SuperStack II Switch 1000’s front panel. These
LEDs indicate power, management, and port activity.
❏ Device — the SuperStack II Switch 1000.
❏ Port — each port on the SuperStack II Switch 1000.
❏ VLAN groups — groups of configured VLANs on the
SuperStack II Switch 1000. These are identified by a
number (displayed in the VLAN identification window)
and a group marker (a green “v” displayed in each port
that belongs to the VLAN group).
Figure 3-3 Front panel image components
Ports
VLAN
Identification
Window
Device
VLAN Group Markers
Status LEDs
book Page 4 Thursday, September 4, 1997 3:47 PM