Asante Technologies 1000 - Manual (Page 70)

Menus
Page 6-14
Network Access
This menu allows you to view and configure network access informa-
tion (both in-band and out-of-band) for the SuperStack II Switch 1000.
Table 6-9 describes each field in the Network Access menu.
∆
Note: For instructions on using this menu, see “Configur-
ing Network Access Parameters” on page 4-5.
Table 6-9 Network Access Menu
Field Description
IP Address Configurable field; sets the device’s in-band IP
address.
Subnet Mask Configurable field; sets the device’s in-band subnet
address.
Note: A subnet mask, in the IP addressing scheme, is
a group of selected bits whose values serve to identify
a subnetwork. All members of the subnetwork share
the mask value.
Router Address Configurable field; sets the address of the default
gateway to which the device belongs.
Bootp Mode Configurable field; sets the device’s method for
retrieving an IP address.
❏
enabled — sets the device to request an IP
address from a BootP server.
❏
disabled — sets the device to NOT request
an IP address from a BootP server; the IP
address must be configured manually via
the device’s console port.
IP Address Configurable field; sets the device’s out-of-band IP
address.
Subnet Mask Configurable field; sets the device’s out-of-band sub-
net address.
book Page 14 Thursday, September 4, 1997 3:47 PM