Asante Technologies 1000 - Manual (Page 49)

VLAN Groups
Page 5-5
Creating VLAN Groups
The SuperStack II Switch 1000 comes with 16 groups of VLAN. By
default, all of the switch’s ports are assigned to vlan1.
To create more groups of VLANs, “group” together the ports that you
want to have on the same segment by dragging and dropping a port but-
ton onto a VLAN group button.
To create a VLAN group:
1
Open the SuperStack II Switch 1000’s Device Page.
2
Wait for the page to validate (it is validated when you
see flashing LEDs).
∆
Note: The front panel image on the Device Page
displays the currently selected VLAN group (such as
1001) as well as the ports that are assigned to that
VLAN. See “Selecting a VLAN Group for Manage-
ment” on page 3-5 for more information.
3
Click once on the VlanView menu.
The VLAN View Page appears.
4
Locate the port you want to assign to a VLAN by find-
ing its port button on the VLAN window.
Use the scroll bar at the bottom of the VLAN window to
scroll to the right and locate port buttons that are not
visible on the screen.
5
Click once on the port’s button and hold down the
left mouse button until a small dot appears next to the
screen’s pointer. See Figure 5-5.
book Page 5 Thursday, September 4, 1997 3:47 PM