Asante Technologies 1000 - Manual (Page 37)

Managing Trap Receivers
Page 4-13
▲ Important: Do NOT type an IP address of 0.0.0.0.
6
Type the community string of the management station
in the
Community String field.
7
Click Apply.
An entry for the management station appears in the table.
If it does not appear, click
Refresh.
Deleting a Trap Receiver
To delete a trap receiver entry:
1
Click once on the row containing the entry to be
deleted.
2
Click Modify.
The Modify Dialog box appears.
3
Open the Status drop-down menu and select notIn-
Service.
4
Click Apply.
5
Click Refresh in the Trap Receiver Table.
The trap receiver is deleted.
Modifying a Trap Receiver
To change the IP address of a trap receiver entry:
1
Delete the trap receiver entry, following the directions
above.
2
Add a new trap receiver entry, following the instruc-
tions on page 4-12.
book Page 13 Thursday, September 4, 1997 3:47 PM