AEG DC4003000M - Manual (Page 20)

Problem Possible cause Remedy
The oven does not heat
up. The clock is not set. Set the clock.
The oven does not heat
up. The necessary settings
are not set. Make sure that the set-
tings are correct.
The oven does not heat
up. The fuse in the fuse box
is released. Do a check of the fuse. If
the fuse is released more
than one time, contact a
qualified electrician.
The oven lamp does not
operate. The oven lamp is defec-
tive. Replace the oven lamp.
The display shows 12.00 There was a power cut. Set the clock.
Steam and condensation
settle on the food and in
the oven. You left the dish in the
oven for too long. Do not keep the dishes
in the oven for longer
than 15-20 minutes after
the cooking ends.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is on the front frame of the appliance cavi-
ty.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
11. INSTALLATION
WARNING!
Refer to the Safety chapters. The built-in unit must meet the
stability requirements of DIN
68930.
20 www.aeg.com