AEG DC4003000M - Manual (Page 9)

6. CLOCK FUNCTIONS
6.1 Electronic programmer
hr min
1 2 1
3 4 5
1
Function indicators
2
Time display
3
Button +
4
Selection button
5
Button -
Clock function Application
Time of day To set, change or check the time of day.
Minute Minder To set a countdown time. An acoustic signal sounds
after the time period is completed. This function has
no effect on the operation of the oven.
Duration To set how long the appliance must operate.
End To set when the appliance must be deactivated.
You can use Duration and
End at the same time to set
the time when the appliance
must be activated and then de-
activated. First set Duration
,
then End .
6.2 Setting the clock functions
1.
For Duration and End , set an
oven function and temperature. This
is not necessary for the Minute
Minder
.
2. Press the Selection button again and
again until the indicator for the nec-
essary clock function flashes.
hr min hr min
3. Press + or - to set the necessary
clock function.
The display shows the indicator for
the clock function you set. When the
set time ends, the indicator flashes
and an acoustic signal sounds for
two minutes.
With the Duration and End
functions, the appliance deacti-
vates automatically.
4. Press a button to stop the signal.
5. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
ENGLISH
9