Olympus E-P1 User Manual

Page 100

Advertising
background image

100

EN

Custom

izi

ng your

camera

9

AEL/AFL MEMO

You can lock and maintain the exposure by pressing the

AEL/AFL button.

[ON]

Press the

AEL/AFL button to lock and maintain the exposure. Press again to

cancel the maintaining of the exposure.

[OFF]

The exposure will be locked only while the

AEL/AFL button is pressed.

; FUNCTION

You can assign a function to the

< button.

[Fn FACE DETECT]

Press the

< button to set [g FACE DETECT] to [ON] and activate the optimal

settings. Press again to set it to [OFF].

g“Using the face detection function” (P. 39), “g FACE DETECT” (P. 104)

[PREVIEW] (electronic)

While holding down the

< button, you can use the preview function.

g“Preview function” (P. 48)

[

V]

Press the

< button to acquire the WB value.

g“Setting the one-touch white balance” (P. 69)

[

P HOME]

Press the

< button to switch to the registered AF home position. Press the button

again to switch to the original AF target mode. If you turn off the camera while it is set
to the AF home position, the original position will not be stored.

g“Registering an AF target mode” (P. 59)

[MF]

Press the

< button to switch AF mode to [MF]. Press the button again to switch to

the original AF mode.

[RAW K]

Press the

< button to switch from JPEG to JPEG+RAW or from JPEG+RAW to JPEG for

the record mode.
You can change the record mode by turning the sub dial while holding down the

<

button.

[TEST PICTURE]

Pressing the shutter button while pressing the

< button enables you to check the

picture you have just taken on the monitor without having to record the picture to the
card. This is useful when you want to see how a picture turned out without saving it.

[MY MODE]

While holding down the

< button, you can take pictures using the camera settings

registered in the [MY MODE SETUP].

g“MY MODE SETUP” (P. 101)

[BACKLIT LCD]

Press the

< button to turn the LCD monitor off. This function is useful when you are

using the optional optical viewfinder. Press the

< button again to turn the LCD

monitor on.

[OFF]

Does not allow function allocation.

s0019_e_00_0_unified.book Page 100 Friday, April 24, 2009 9:21 AM

Advertising