Olympus E-P1 - Manual (Page 16)

16
EN
Shooting
250 250 250 F5.6 F5.6
38 38
P
L N N
Shutter button
Card
access
lamp
• The shutter sounds and the picture is taken.
• The card access lamp blinks and the camera starts recording the picture.
AF confirmation mark
Aperture value
Shutter speed
1
Select a composition while
viewing the LCD monitor
2
Adjust the focus
3
Release the shutter
Press the shutter
button halfway.
LCD monitor
Press the shutter button all
the way (fully).
Never remove the battery or card while the card access lamp is blinking. Doing so could
destroy stored pictures and prevent storage of pictures you have just taken.
• The focus is locked, the AF confirmation mark appears, and the AF target appears at the
focus position.
• The shutter speed and aperture value that have been set automatically by the camera are
displayed.
AF target
LCD monitor
s0019_e_00_0_unified.book Page 16 Friday, April 24, 2009 9:21 AM