Olympus E-P1 - Manual (Page 95)

95
EN
8
Setup f
u
nc
ti
ons
REC VIEW
You can display the picture you have just taken on the monitor while it is being recorded to
the card, and to select how long the picture is displayed. This is useful for making a brief
check of the picture you have just taken. Pressing the shutter button halfway while checking
the picture lets you resume shooting immediately.
[1SEC]-[20SEC] Selects the number of seconds to display each picture. Can be set in
units of 1 second.
[OFF] The picture being recorded to the card is not displayed.
[AUTO q] Displays the image being recorded, and then switches to playback
mode. This is useful for erasing a picture after checking it.
cMENU DISPLAY gP. 25
FIRMWARE
Your productís firmware version will be displayed.
When you make inquiries about your camera or accessories or when you want to download
software, you will need to state which version of each of the products you are using.
s0019_e_00_0_unified.book Page 95 Friday, April 24, 2009 9:21 AM