Olympus E-P1 - Manual (Page 122)

122
EN
11
Usi
n
g the OLYMP
U
S
Ma
ster
softw
are
Disconnecting the camera from your computer
1
Make sure that the card access lamp has
stopped blinking.
2
Prepare to remove the USB cable.
Windows
1) In the system tray, click the “Unplug or Eject
Hardware” icon .
2) Click on the pop-up message.
3) Click “OK” on the “Safe to Remove Hardware”
window.
Macintosh
1) The trash icon changes to the eject icon when the
“Untitled” or “NO_NAME” icon on the desktop is
dragged. Drag and drop it on the eject icon.
3
Unplug the USB cable from the camera.
x
Notes
• For Windows users:
When you click “Unplug or Eject Hardware”, a warning message may be displayed. In such
case, make sure that no image data is being downloaded from the camera, and that there are
no applications open that were accessing the camera image files. Close any such
applications and click “Unplug or Eject Hardware” again and then remove the cable.
Card access lamp
s0019_e_00_0_unified.book Page 122 Friday, April 24, 2009 9:21 AM