Olympus E-P1 - Manual (Page 93)

93
EN
7
Pl
aybac
k f
u
nc
tions
Single-frame erase
1
Display the images you want to erase and press the D
button.
2
Use fg to select [YES], then press the i button.
Erasing selected frames
During index display, you can select multiple images and erase them all at the same time.
1
Select the images you wish to erase on the index display, then press i.
• The selected images will be shown with v.
• To cancel your selection, press the
i button again.
2
Press k to select the next images you want to protect, then press the i button.
3
After you have selected the images to erase, press the D button.
4
Use fg to select [YES], then press the i button.
All-frame erase
1
MENU[W][CARD SETUP]
2
Use fg to select [ALL ERASE], then press the i button.
3
Use fg to select [YES], then press the i button.
• All frames will be erased.
To erase immediately:
j If you have set “QUICK ERASE” (gP. 109) to [ON], pressing the D button will erase an image
immediately.
j You can set the initial position of the cursor to [YES]. g“PRIORITY SET” (P. 110)
 TIPS
D button
s0019_e_00_0_unified.book Page 93 Friday, April 24, 2009 9:21 AM