Olympus E-P1 - Manual (Page 126)

126
EN
12
Sh
ooting tips
and main
te
nance
Error codes
Monitor
indication
Possible cause Corrective action
NO CARD
The card is not inserted, or it
cannot be recognized. Insert a card or insert a different card.
CARD ERROR
There is a problem with the card. Insert the card again. If the problem
persists, format the card. If the card
cannot be formatted, it cannot be used.
WRITE PROTECT
Writing to the card is prohibited.
The card write-protect switch is set to the
[LOCK] side. Release the switch.
gP. 130
CARD FULL
The card is full. No more
pictures can be taken or no
more information such as print
reservation can be recorded. Replace the card or erase unwanted
pictures.
Before erasing, download important
images to a PC.
CARD FULL
There is no space in the card
and print reservation or new
images cannot be recorded. Replace the card or erase unwanted
pictures.
Before erasing, download important
images to a PC.
Card cannot be read. Card may
not have been formatted. • Select [CLEAN CARD], press the i
button and turn off the camera. Remove
the card and wipe dry the metallic
surface with a soft, dry cloth.
• Select [FORMAT][YES], and then
press the i button to format the card.
Formatting the card erases all data on
the card.
NO PICTURE
There are no pictures on the
card. The card contains no pictures.
Record pictures and play back.
PICTURE ERROR
The selected picture cannot be
displayed for playback due to a
problem with this picture. Or the
picture cannot be used for
playback on this camera. Use image processing software to view
the picture on a PC.
If that cannot be done, the image file is
damaged.
THE IMAGE
CANNOT BE
EDITED
Pictures taken with another
camera cannot be edited on this
camera. Use image processing software to edit the
picture.
CLEAN CARD
FORMAT
Clean the contact area of
the card with a dry cloth.
CARD SETUP
SET
s0019_e_00_0_unified.book Page 126 Friday, April 24, 2009 9:21 AM