Olympus E-P1 - Manual (Page 91)

91
EN
7
Pl
aybac
k f
u
nc
tions
3
Use k to select a frame and press the i button.
• Repeatedly select images only for the number of frames
selected in Step 2.
• To cancel your selection, press the i button again.
4
Use hi to select an image, then use fg to
select the gain for each image. Press the i
button.
• Select from 0.1 to 2.0.
• The displayed image changes as the gain is adjusted.
5
Use fg to select [YES], then press the i
button.
To overlay 4 or more frames:
j To overlay 4 or more frames, save the overlay image as a RAW file and use [IMAGE OVERLAY]
repeatedly.
x
Notes
• When the record mode is set to [RAW], the overlay image is saved as [YN+RAW].
• When selecting a frame to overlay, the JPEG images for images recorded in JPEG+RAW are
displayed.
Protect images you do not want to erase. Protected images cannot be erased by the single-
frame or all-frame erase function.
Single-frame protect
Play back the image you want to protect and press the 0
button.
•
9 (protect mark) is displayed on the top right corner of the
screen.
To cancel the protection
Display the images that are protected and press the
0
button.
 TIPS
Protecting images
IMAGE OVERLAY
RAW RAW RAW RAW RAW RAW
RAW RAW RAW RAW
RAW RAW
RAW RAW
BACK SET
x0.3 x0.3 x0.1 x0.1 x0.3 x0.3
IMAGE OVERLAY
BACK SET
i button
0 button
s0019_e_00_0_unified.book Page 91 Friday, April 24, 2009 9:21 AM