Olympus E-410 - Manual (Page 17)

EN
17
Mastering the E-410
1
2
Turn the control dial to change the setting.
• Press the i button to confirm your setting. Or if you do not operate the control dial within a few
seconds, your setting will be confirmed and the control panel screen will be restored.
List of direct buttons
The functions assigned to buttons are as shown below.
Setting on the menu
1
Press the MENU button.
• The menu is displayed on the LCD monitor.
2
Use p to set a function.
No. Direct buttons Function Ref. page
1 < / Y / j
Remote control / Self-timer /
Sequential shooting button Remote control / Self-timer /
Sequential shooting
P. 39
2 F Exposure compensation button Exposure compensation P. 47
3 u Live view button Turns live view on or off P. 18
4 # Flash button
Pops up the flash and sets
flash mode
P. 35
CUSTOM RESET
SETTING
Operation guide is displayed at the bottom of the screen.
CANCEL J
a : Press MENU to cancel the setting.
SELECT J / : Press dac to select the item.
The illustration displayed corresponds to the arrow pad shown below.
: a : c :d :b
GO J f : Press i to confirm your settings.
MENU button
p Arrow pad i button
Tab The current setting is displayed
CUSTOM RESET
SETTING
NOISE FILTER STANDARD
NOISE REDUCT.
Function
Moves to the functions under the tab you
have selected. Select a function and go to the setting screen.