Olympus E-410 - Manual (Page 70)

70
EN
Cu
stomizing the setti
ngs / functions of yo
ur
camera
5
Changing the display language
You can change the language used for the on-screen display and error messages from
ENGLISH to another language.
MENU[Z][W]
Use ac to select the language you want to use.
• You can add another language to your camera with the provided OLYMPUS Master software.
For details, refer to Help in OLYMPUS Master software. ( gP. 77)
Selecting the video signal type before TV connection
This lets you select NTSC or PAL according to your TV’s video signal type.
You will need to set this when you want to connect the camera to a TV and play back images in
a foreign country. Make sure the correct video signal type is selected before connecting the
video cable. If you use the wrong video signal type, recorded pictures will not play back
properly on your TV.
MENU[Z][VIDEO OUT]
[NTSC] / [PAL]
TV video signal types in major countries and regions
Check the video signal type before connecting the camera to your TV.
HI (Underwater mode)
It is possible to switch [ J] (SPORT) and [U] (NIGHT+PORTRAIT) on the mode dial to [H]
(UNDER WATER MACRO) and [I] (UNDER WATER WIDE). Use an optional underwater
protector for underwater shooting.
MENU[Y][JU / HI]
[DIAL JU] / [DIALHI]
Firmware
Your product’s firmware version will be displayed.
When you make inquiries about your camera or accessories or when you want to download
software, you will need to state which version of each of the products you are using.
MENU[Z][FIRMWARE]
Press d. Your product’s firmware version will be displayed. Press the i button to return to
the previous screen.
NTSC North America, Japan, Taiwan, Korea
PAL European countries, China