Olympus E-410 User Manual
Page 94
94
EN
Information
9
Formatting the card
Non-Olympus cards or cards formatted on a computer must be formatted with the camera
before they can be used.
All data stored on the card, including protected images, is erased when the card is formatted.
When formatting a used card, confirm there are no images that you still want to keep on the
card.
1
MENU[W][CARD SETUP]
2
Use
ac to select [FORMAT], then press
the
i button.
3
Use
ac to select [YES], then press the i
button.
• Formatting is performed.
TIPS
When inserting cards into the two card slots:
J Select the card to be used in [CF / xD] of
MENU.
MENU[Z][CF / xD]
[CF] / [xD]
z
Use the single Olympus lithium-ion battery (BLS-1).
Other batteries cannot be used.
z
The camera’s power consumption varies widely with usage and other conditions.
z
As the following consume a lot of power even without shooting, the battery will be drained
quickly.
• Pressing the shutter button halfway in shooting mode, performing auto focus repeatedly.
• Using live view.
• Displaying images on the LCD monitor for a prolonged period.
• When connected to a computer or printer.
z
When using a drained battery, the camera may turn off without the low battery warning
being displayed.
z
The battery will not be fully charged at the time of purchase. Charge the battery using the
designated charger (BCS-1) before use.
z
The normal charging time of the provided charger is approximately 210 minutes
(estimated).
z
Do not use chargers other than the one designated.
z
The charger can be used in most home electrical sources within the range of 100 V to
240 V AC (50 / 60 Hz) around the world. However, depending on the country or area you
are in, the AC wall outlet may be shaped differently and the charger may require a plug
adapter to match the wall outlet. For details, ask at your local electrical shop or travel
agent.
z
Do not use commercially available travel adaptors as the charger may malfunction.
Battery and charger
Using your charger abroad