Olympus E-410 - Manual (Page 9)

EN
9
Basic guide
When the camera stops operating
If no operations are performed for approximately 8 seconds while the camera is on, the monitor
backlight turns off to save battery power. If no operations are performed for approximately one
minute thereafter, the camera enters the sleep mode (stand-by) and stops operating. The
camera activates again when you touch any button (the shutter button, arrow pad, etc.).
g “Backlight timer” (P. 69), “Sleep timer” (P. 69)
Playing back images
Pressing the q (playback) button displays the last picture taken.
Close-up playback
Each time you rotate the control dial towards U, the image is enlarged in steps of 2x – 14x.
Erasing images
Playback the image you want to erase and press the S (erase) button.
Use ac to select [YES] and press the i button to erase.
Playback / Erasing
Displays the
previous frame Displays the next
frame
Arrow pad
q button
S button
Control dial