Olympus E-410 - Manual (Page 74)

74
EN
Printing
6
3
Use p to select [EASY PRINT] or [CUSTOM
PRINT].
If you select [EASY PRINT]
• Go to “Easy printing” (P. 74).
If you select [CUSTOM PRINT]
• [ONE MOMENT] is displayed and the camera and printer
are connected.
Go to “Custom printing” (P. 74).
Easy printing
1
Use bd to display the pictures you want to print on the camera.
• Display the image you want to print on the camera and
connect the camera with a printer using a USB cable. The
screen on the right appears shortly.
2
Press the < (print) button.
• The picture selection screen appears when printing is
completed. To print another picture, use bd to select the
image and press the < button.
• To exit, unplug the USB cable from the camera while the
picture selection screen is displayed.
Custom printing
1
Follow the operation guide to set a print option.
Selecting the print mode
Select the type of printing (print mode). The available print modes are as shown below.
[PRINT] Prints selected pictures.
[ALL PRINT] Prints all the pictures stored in the card and makes one print for each picture.
[MULTI PRINT] Prints multiple copies of one image in separate frames on a single sheet.
[ALL INDEX] Prints an index of all the pictures stored in the card.
[PRINT ORDER] Prints according to the print reservation you made. If there is no picture with
print reservation, this is not available. (
gP. 71)
x Notes
• If the screen is not displayed after a few minutes, disconnect the USB Cable and start again
from Step 1.
STORAGE
CONTROL
EASY PRINT
Follow the operation guide displayed here.