Olympus E-410 - Manual (Page 67)

EN
67
Cu
stomizing the setti
ngs / functions of yo
ur
camera
5
Compensating all WB
This lets you apply the same compensation value to all the white balance modes at once.
MENU[Y][ALL>]
[ALL SET] : The same compensation value applies to all WB modes.
[ALL RESET] : The WB compensation value settings applied to each WB mode are all
cleared at once.
If you select [ALL SET]
1) Use bd to select the color direction.
R-B Red – Blue / G-M Green – Magenta
2) Use ac to set compensate value. “WB Compensation” (g P. 51)
• You can check the white balance you have adjusted.
If you select [ALL RESET]
1) Use ac to select [YES].
Auto pop up
The built-in flash pops up automatically in low light or backlight conditions while in the AUTO or
scene mode.
This allows you to stop the built-in flash from popping up automatically.
MENU[Y][AUTO POP UP]
[ON] : The built-in flash pops up automatically.
[OFF] : The built-in flash will not pop up automatically.
7 FUNCTION
This lets you assign a function to the b button.
MENU[Y][7 FUNCTION]
[OFF]
Does not allow function allocation.
[ V]
Press the b button to acquire the WB value.
g “Setting the one-touch white balance” (P. 51)
[TEST PICTURE]
Pressing the shutter button while pressing the b button enables you to check the
picture you have just taken on the monitor without having to record the picture to the
card. This is useful when you want to see how a picture turned out without saving it.
[PREVIEW] / [LIVE PREVIEW] (electronic)
While holding down the b button, you can use the preview function.
g “Preview function” (P. 30)
Live view boost
During live view shooting, you can brighten the monitor for easier confirmation on the subject.
MENU[Y][LIVE VIEW BOOST]
[OFF]
The subject is displayed on the monitor with the brightness level that is adjusted
according to the exposure being set. You can shoot while confirming through the
monitor in advance to get a picture that is to your liking.
[ON]
The camera automatically adjusts the brightness level and displays the subject on the
monitor for easier confirmation. The effect of the white balance and exposure
compensation adjustments will not be reflected on the monitor.