Olympus E-410 - Manual (Page 62)

62
EN
Playback functi
ons
4
Protecting selected frames
This function lets you protect selected images at one time during single-frame playback or
index display.
1
Display the images you want to protect and press the i button.
• The selected images will be shown with red frames.
• To cancel your selection, press the
i button again.
• During index display, press p to select the images you want to protect and press the i
button.
2
Press p to display the next images you want to protect and press the i
button.
3
After you have selected the images to protect, press the 0 (protect)
button.
Canceling all protections
This function lets you cancel the protection of several images at one time.
1
MENU[q][RESET PROTECT]
2
Use ac to select [YES], then press i.
Lets you erase recorded images. You can select single-frame erase, which erases only the
currently displayed image; all-frame erase, which erases all the images stored on the card; or
selected frame erase, which erases only the frames selected.
x Notes
• Formatting the card erases all images even if they have been protected. ( gP. 94)
• Protected images cannot be rotated.
Erasing images
x Notes
• For image file types recorded using RAW+JPEG, single-frame erase erases only the JPEG
images while the RAW data is retained. For all-frame and selected frame erase, both the RAW
and JPEG images are erased.
• Protected images cannot be erased. Cancel protected images, then erase them.
• Once erased, images cannot be restored.
g “Protecting images – Preventing accidental
erasure” (P. 61)