Creating panoramic images, Selecting the focusing on a face, 26 en – Olympus FE-3000 User Manual
Page 26: Creating panoramic images [ panorama] b, Selecting the focusing on a face [ face detect] b
Creating panoramic images [ PANORAMA]
E: P h
Panorama shooting lets you create a panoramic picture, using the OLYMPUS Master 2
software on the provided CD-ROM.
The focus, exposure (p. 20), zoom position (p. 19), and [WB] (p. 25) are locked at the fi rst frame.
The fl ash (p. 19) is fi xed to
$ (FLASH OFF) mode.
1 Use klmn to select the direction that the frames are combined.
2 Press the shutter button to take the fi rst frame, and then compose the second shot.
The part of the previous picture where it will be joined to the next picture does not remain in the frame. You
have to remember what the part in the frame looked like and take the next picture so it overlaps.
3 Repeat Step 2 until the number of desired frames is taken, and then press the B button
when fi nished.
g mark is displayed, you cannot continue shooting any further. Panorama shooting is
possible for up to 10 frames.
Refer to the OLYMPUS Master 2 help guide for details on how to make panorama images.
Selecting the focusing on a face [ FACE DETECT]
X FACE DETECT
E: P h
The camera does not focus on a face.
This is used for taking pictures of people. (The camera automatically detects a face and a
frame is displayed.)
For some subjects, the frame may not appear or may take some time to appear.