Printing, Direct printing (pictbridge), Printing images at the printer’s standard settings – Olympus FE-3000 User Manual

Page 34

Advertising
background image

34 EN

Printing

2

Turn on the printer, and then

connect the printer and camera.

USB cable (supplied)

Multi-connector

OK

PC / CUSTOM PRINT

EASY PRINT START

n button

3

Press the n button to start printing.

4

To print another image, use mn

to select an image, and press the
B button.

To exit printing

After a selected image is displayed on the
screen, disconnect the USB cable from the
camera and printer.

PRINT

EXIT

OK

Direct printing ( PictBridge

*1

)

By connecting the camera to a PictBridge-
compatible printer, you can print images directly
without using a computer.
To fi nd out if your printer supports PictBridge,
refer to the printer’s instruction manual.

*1

PictBridge is a standard for connecting digital

cameras and printers of different makers and
printing out pictures directly.

The printing modes, paper sizes, and other

parameters that can be set with the camera
vary depending on the printer that is used.
For details, refer to the printer’s instruction
manual.

For details on the available paper types,

loading paper, and installing ink cassettes,
refer to the printer’s instruction manual.

Printing images at the

printer’s standard settings

[ EASY PRINT]

1

Display the image to be printed on

the monitor.

“Viewing images” (p. 15)

Printing can also be started when the

camera is turned off. After performing Step
2, use kl to select [EASY PRINT],
press the B button. Use mn to select an
image, and press the B button.

Advertising
This manual is related to the following products: