Olympus E-300 - Manual (Page 156)

Flowchart
156
10
T
ransf
erring ima
g
es to a computer
● When connecting the camera to the computer, use the provided AC adapter
whenever possible. When connected (transmitting) to the computer, the
camera may stop operating if battery power runs low. This could cause the
computer to malfunction, and any image data (file) being transmitted may be
lost.
● Never open the camera’s battery/card compartment cover or disconnect or
connect the AC adapter while the card access lamp is blinking. Doing so
may destroy the image files.
● If the camera is connected to the computer via a USB hub, operation may
not be stable if there are any compatibility problems between the computer
and the hub. In such cases, do not use the hub and connect the camera
directly to the computer instead.
Just connect the camera to a computer with the USB cable and you can easily
transfer images stored on the card to the computer with the provided OLYMPUS
Master software.
Installing OLYMPUS Master ~ P. 159
Connecting the camera to the computer using the provided
USB cable
~ P. 163
Starting OLYMPUS Master ~ P. 165
Saving images in the computer ~ P. 166
Disconnecting the camera from the computer ~ P. 167
¥
¥
¥
¥
Note
10E-300EN-P155 04.10.22 11:36 AM Page 156