Olympus E-300 - Manual (Page 78)

5
Focusing functions
78
AF frame selection
Normally, the camera measures the distance to the subject using the 3 AF frames
in the viewfinder and selects the most appropriate point. This function allows you
to select only one AF frame.
(AUTO) : Focuses using the 3 AF
frames. (Factory default
setting)
: Focuses using the left AF
frame.
: Focuses using the center AF
frame.
: Focuses using the right AF
frame.
Right AF frame Left AF frame
Center AF frame
Viewfinder
button
Control dial
MENU
AUTO
Monitor
1
Press the (AF frame selection)
button.
● The current setting is displayed on the
monitor.
2
Rotate the control dial until the
desired setting is displayed.
3
Take the picture.
● The AF frame you have selected lights up.
P A S M
Available modes
When the control panel screen is off
05E-300EN-P77 04.10.22 11:24 AM Page 78