Olympus E-300 - Manual (Page 48)

3
Selecting the right mode f
or shooting conditions
48
Selecting the right mode for the shooting technique — P , A , S and M
3
Press the shutter button halfway.
● Focusing is performed and the AF
confirmation mark lights on the viewfinder.
● The aperture value that has been set
automatically by the camera is displayed on
the viewfinder.
Halfway down
If the aperture value indication at the
minimum value is blinking, the correct
exposure is not attained (underexposed). Set
the shutter speed slower. If the aperture value indication at the
maximum value is blinking, the correct
exposure is not attained (overexposed). Set
the shutter speed higher.
4
Press the shutter button all the way.
All the way
down
Shutter speed indication
If the selected shutter speed is less than 1 second, only its denominator will be
displayed such as 200 for 1/200 sec., and if more than 1 second, a double-quote
mark " will be displayed such as 1" for 1 sec.
Aperture value
Viewfinder
Shutter speed
AF confirmation
mark
Exposure mode
Aperture value
Viewfinder
Shutter speed
AF confirmation
mark
Exposure mode
03E-300EN-P37 04.10.22 11:19 AM Page 48