Olympus E-300 - Manual (Page 183)

183
11
Appendix
PIXEL MAPPING — Checking the image processing functions
Camera maintenance
The PIXEL MAPPING feature allows the camera to check and adjust the CCD and
image processing functions. It is not necessary to operate this function frequently.
Approximately once a year is recommended. After using the monitor or taking
continuous shots, wait for at least one minute before using the PIXEL MAPPING
function to ensure that it operates correctly.
1 Menu T T PIXEL MAPPING
~ “How to use the menus” (P. 25)
2 Press , then press the OK button.
● The busy bar is displayed during PIXEL
MAPPING. When PIXEL MAPPING is
finished, the menu is restored.
2
PIXEL MAPPING
ERASE SETTING NO
COLOR SPACE
RESET LENS OFF
s RGB
CLEANING MODE
1
2
1
2
CANCEL SELECT GO MENU
BUSY
OK button
● If you accidentally turn the camera off
during PIXEL MAPPING, start again
from Step 1.
Note
11E-300EN-P171 04.10.22 11:38 AM Page 183