Olympus E-300 - Manual (Page 75)

4
V
arious shooting functions
75
Drive mode
TIPS
The remote control lamp does not blink after the shutter button on the
remote control is pressed.
T The transmitted signal may not be effective if the remote control receiver is
exposed to powerful lighting. Move the remote control closer to the camera
and press the shutter button on the remote control again.
T The transmitted signal may not be effective if the remote control is too far
from the camera. Move the remote control closer to the camera and press
the shutter button on the remote control again.
T There is signal interference. Change the channel as described in the remote
control's instruction manual.
To cancel the remote control shooting mode:
T The remote control shooting mode will not be canceled after shooting. In the
menu, switch from DRIVE to one of the other modes.
To use the shutter button on the camera in the remote control shooting
mode:
T The shutter button on the camera still works even if or is displayed.
● The shutter will not be released if the subject is not in focus.
● Under bright light conditions, the remote control lamp may be difficult to see,
making it hard to determine whether or not the picture has been taken.
● Zoom is not available on the remote control.
Note
This setting lets you add special effects to pictures.
BLACK & WHITE : Records pictures in black and white.
SEPIA : Records pictures in sepia.
MONOTONE shooting
1
Menu T T MONOTONE T OFF, BLACK & WHITE, SEPIA
~
“How to use the menus” (P. 25)
P A S M Available modes
04E-300EN-P53 04.10.22 11:22 AM Page 75