Boss Audio Systems BR-600 - Manual (Page 105)

105
Insert Effect Parameter Functions
Re
v0.10
Section 3
Produces a lo-fi sound.
On/Off OFF, ON
This parameter turns the lo-fi box effect on/off.
Type
Select the mode of the lo-fi box.
RADIO :
The sound will appear to be heard from an AM radio.
* By adjusting “Tuning,” you can simulate the sounds that
occur when you adjust the tuning frequency of the radio.
PLAYER :
The sound will appear to be heard from a gramophone. The
noise caused by scratches and dust on the record are is
simulated.
DIGITAL :
This allows you to create a “lo-fi” sound by lowering the
sample rate and/or decreasing the number of bits. Realtime
modify filters connected in series allow you to reshape the
sound freely.
■ When “RADIO” or “PLAYER” is selected
Tuning 0 – 100
This is a parameter for “RADIO.” It simulates the sounds
that occur when you adjust the tuning frequency of an AM
radio.
Wow Flt 0 – 100
This is a parameter for “PLAYER.” It simulates the wow
and flutter which occur when the speed of the turntable is
not constant.
Noise 0 – 100
This simulates noise.
Filter 0 – 100
Adjusts the filter.
D:E 100:0 – 0:100
This adjusts the volume balance of the direct and effect
sounds.
■ When “DIGITAL” is selected
Pre Filter OFF, ON
This filter decreases digital distortion. When turned off, you
can create an intense lo-fi sound incorporating digital
distortion.
Smpl Rate OFF, 1/2 – 1/32
Modify the sample rate.
Bit OFF, 15 – 1
Modify the number of data bits. If this is turned off, the
number of data bits will be unchanged. If an extremely low
number of bits is selected, loud noise may appear even
when there is no sound, depending on the input source. In
such cases, raise the threshold of the noise suppressor.
Post Fltr OFF, ON
This filter decreases the digital distortion produced by lo-fi.
By turning this off, you can create an extremely lo-fi sound.
Fx Level 0 – 100
Adjust the volume of the lo-fi sound.
Dir Level 0 – 100
Adjusts the volume of the direct sound.
Modify Fil
This is a filter featuring a wide range of possible settings
(modifiable filter). Select different types to get a variety of
different filter effects.
OFF :
The modify filter will not be used.
LPF :
The effect will function as a low pass filter.
BPF :
The effect will function as a band pass filter.
HPF :
The effect will function as a high pass filter.
Cutoff F 0 – 100
Adjust the cutoff frequency.
Resonance 0 – 100
Adjust the resonance.
Gain 0 – 24 dB
Adjust the volume level of the sound that has passed
through the modify filter.
Lo-Fi Box