Boss Audio Systems BR-600 - Manual (Page 166)

166
With Windows
Re
v0.10
5
When restoring data backed up on a computer to the
BR-600, drag the “ROLAND” folder to the
“BOSS_BR-600” icon (or the “Removable disk (*:)”
icon) and drop it there (overwriting it).
fig.05-070
When you have finished recovering the data, the Idling
screen returns to the display.
6
Quit the connection to the computer.
With Windows XP
In My Computer, right-click on the “BOSS_BR-600”
icon (or “Removable disk (*:)” icon) to “Eject” the disk.
* If this procedure fails to eject the disk, use the procedure
below.
1) Click the icon in the task tray, then click the
“Stop USB Disk–drive (*:)” message displayed
there.
fig.05-080
2) Click [OK] in the “Safe To Remove Hardware”
dialog box that appears.
With Windows 2000/Me
1) In My Computer, right-click on the “BOSS_BR-
600” icon (or “Removable disk (*:)” icon) to
“Eject” the disk.
2) Click the icon in the task tray, then click the
“Stop USB Disk–drive (*:)” message displayed
there.
fig.05-080
3) Click [OK] in the “Safe To Remove Hardware”
dialog box that appears.
7
Press [EXIT].
The USB screen returns to the display.
* If you press [EXIT] without quitting the connection to the
computer, the following screens appear.
In this case, pressing [ENTER] returns the USB screen to
the display.
fig.05-100
8
When recover of the data is complete, press [EXIT] to
return to the Play screen.
At this point, you can safely disconnect the USB cable
from the BR-600 and the computer.
• During the recovery operation you may encounter
messages asking whether it is all right to overwrite
certain files–you should select “YES” in every
instance. If “NO” is selected even onece, the
recovery operation will be incomplete, and this
may prevent the BR-600 from operating correctly.
• When the BR-600 performs Recover, the data on
memory cards will be overwrited.
Task Tray Task Bar
Task Tray Task Bar