Boss Audio Systems BR-600 - Manual (Page 200)

200
Re
v0.10
Conserving Battery Power (Power Save)
Your BR-600 is equipped with a power save function that
limits the current dissipation during use.
When the power save function is activated, if no button, or
TIME/VALUE dial on the BR-600 is used for a certain
amount of time, the BR-600 will enter the standby state and
turn off the display backlight and button indicators.
Also, when in the standby state, the display will appear as
shown below.
fig.06-310
Perform the procedure given below to activate the power
save function.
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [ ] [ ] to move the cursor to
“SYS,” and press [ENTER].
fig.06-320
3
Press CURSOR [ ] [ ] to select “PowerSave,” and
turn the TIME/VALUE dial to set the time until the
Power Save function is activated.
Valid Settings : OFF, 1min, 3min, 5min, 10min
fig.06-330
4
Press [UTILITY] (or press [EXIT] repeatedly) to return
to the Play screen.
* During updating, “Keep power on!” appears in the upper
line of the display, while the lower line shows what is being
processed.
■ Deactivating the power save
function
Press any of the panel buttons to deactivate power save.
• The power save function is not activated during
recording and playback of songs, even when no
button or TIME/VALUE dial is used for the set
amount of time.
• The power save function is especially helpful
when the BR-600 is running on battery power.
• After the power save function is deactivated, the
Play screen appears.