Boss Audio Systems BR-600 - Manual (Page 177)

177
With Windows
Re
v0.10
Section 5
6
Delete the BR-600 “ROLAND” folder.
1) Click the “BOSS_BR-600” (or “Removable disk
(*:)”) icon, and delete the “ROLAND” folder.
7
Drag the previously backed up BR-900CD / BR-864 /
BR-532 “ROLAND” folder to the “BOSS_BR-600” (or
“Removable disk (*:)”) icon and drop it there.
fig.05-490
When you have finished backing up the data, the
Idling screen returns to the display.
8
Quit the connection to the computer.
With Windows XP
In My Computer, right-click on the “BOSS_BR-600”
icon (or “Removable disk (*:)” icon) to “Eject” the disk.
* If this procedure fails to eject the disk, use the procedure
below.
1) Click the icon in the task tray, then click the
“Stop USB Disk–drive (*:)” message displayed there.
fig.05-080
2) Click [OK] in the “Safe To Remove Hardware”
dialog box that appears.
With Windows 2000/Me
1) In My Computer, right-click on the “BOSS_BR-
600” icon (or “Removable disk (*:)” icon) to
“Eject” the disk.
2) Click the icon in the task tray, then click the
“Stop USB Disk–drive (*:)” message displayed there.
fig.05-080
3) Click [OK] in the “Safe To Remove Hardware”
dialog box that appears.
9
Press [EXIT].
The USB screen returns to the display.
* If you press [EXIT] without quitting the connection to the
computer, the following screens appear. In this case, pressing
[ENTER] returns the USB screen to the display.
fig.05-520
10
When backup of the data is complete, press [EXIT] to
return to the Play screen.
At this point, you can safely disconnect the USB cable
from the BR-600 and the computer.
Task Tray Task Bar
Task Tray Task Bar